Super NES & NES (PAL and Twin Famicom) Triad PSU Kits The Castlemania Games SNES PAL Triad kit works for the Sharp Twin Famicom (use promo code FBX for 10% off!): * The OEM supply outputs at 7.6V DC, but the regulator can handle well over 10V. You'll need is a Y-splitter in 5.5mm x 2.1mm barrel size: International 9V 2.5A, Center-Negative, 5.5mm x 2.1mm: Triad WSX090-2500-RĬastlemania Games has you covered to supply each of these consoles (use promo code FBX for 10% off!):Īll-in-One Solution for the Famicom Disk System: North America 9V 1.3A, Center-Negative, 5.5mm x 2.1mm: Triad WSU090-1300-R NES (front-loader), NES (top-loader), Famicom, AV Famicom, Famicom Disk System: Below are various Triad PSU links for each console:

You could very easily fry your console by overvolting it! The exception to this are consoles with DC inputs typically ranging from 7V up to 13V, as these use regulators that convert the voltage to a flat 5V inside the console. It's voltage that you need to be careful about, so don't use a 9-Volt power supply on a system that only needs 5 Volts. On amp rating, you can never have too much, as the console will only take what it needs from the power supply. If you spot any mistakes, don't hesitate to send me an email with a heads-up on the link in question. While my recommendations take polarity into account, it's a good idea to verify on your own. Many require a 'center negative' barrel, while others require a 'center positive' barrel. Take care to always observe the polarity requirements for most consoles. In some cases, I also link to barrel adapters and polarity reversing adapters for situations like building an all-in-one solution for 'Tower of Power' setups (Sega Genesis + Sega CD + 32X). This is my recommended power supply replacements for missing or damaged original supplies for various vintage consoles. Press CRTL + F5 to check for page updates in Firefox. Last updated: : Updated new recommendation for Turbo Dock.

Download firebrand snes